-
Phone
+8618700875368
-
Address
No.6 Zhangba First St, Xian High-Tech Area, Shaanxi Province
-
E-mail
Importance of Coating Testing in Modern Industries
In modern industry, coatings serve not only aesthetic purposes but also crucial functional roles-corrosion resistance, UV stability, temperature endurance, and waterproofing. To ensure these properties meet international standards and customer expectations, accelerated environmental testing is essential. LIB's comprehensive suite of environment chambers simulates real-world conditions, enabling precise evaluation of coating durability and long-term performance.
Surface Coating Applications
Coatings are applied across electric power, electrical machinery, electronics, aviation, atomic energy, space technology, and more. When selecting a coating system to protect steel or other substrates, it's vital to verify performance under extremes of temperature, humidity, pressure, UV exposure, and chemical attack. A wrong decision can lead to costly failures, complex repairs, and extended downtime.
Advanced Coating Testing Equipment by LIB
Profile: Continuous fog per ASTM B117 and ISO 9227 using a 5 % NaCl solution, delivered through a high‑precision quartz nozzle at 83 kPa; 30 L built‑in heated and stirred salt tank; saturated‑air fog at 35 °C ± 2 °C; salt deposition rate of 1–2 ml/80 cm²·h.
Coating Focus: Evaluates corrosion resistance of coatings on metal, marine, and infrastructure components under constant salt‑fog conditions.
Standards Compliance: ASTM B117; ISO 9227; MIL‑STD 810
Cyclic Salt Corrosion Test Chamber
Profile: Programmable cycles alternating salt‑mist (per IEC 60068‑2‑11), temperature (10 °C–90 °C), humidity (30 %–98 % RH), and dry phases; dual rear fans; PLC touchscreen; external salt tank with continuous mixing and purified recirculation.
Coating Focus: Simulates outdoor cyclic corrosion stresses-combining salt fog, heat, humidity, and dry periods-for long‑term coating performance assessment.
Standards Compliance: ASTM G85; ISO 7253; IEC 60068‑2‑52
SO₂ Salt Corrosion Test Chamber
Profile: Simultaneous 5 % NaCl fog and controlled SO₂ gas injection (25 ± 5 ppm) with NaOH neutralizing tank; PLC‑controlled gas flow and spray cycles; temperature and humidity regulation.
Coating Focus: Replicates acidic industrial or urban atmospheres-including acid rain and exhaust gases-to validate protective coatings on infrastructure and equipment.
Standards Compliance: ASTM B117; IEC 60068‑2‑60
Profile: 8×40 W QUV lamps (UVA‑340 or UVB‑313) simulating 290–400 nm UV spectrum per ISO 4892‑3 and ASTM G154; chamber temperature up to 90 °C; ≥ 95 % RH; 10‑nozzle water spray at 0.3 L/min; black panel temperature sensors and UV radiometers; 52 adjustable sample holders.
Coating Focus: Accelerated evaluation of UV‑induced fading, chalking, cracking, and degradation in paints, plastics, and sealants.
Standards Compliance: ISO 4892‑3; ASTM G154; SAE J2412; SAE J2527
Profile: Full‑spectrum xenon lamp (280–800 nm) at 4 500 W with water cooling; rotating sample holder for 42 specimens; dual water‑spray systems; PID‑controlled programmable profiles; full‑spectrum radiometers (340 nm, 420 nm).
Coating Focus: Realistic solar radiation and thermal stress simulation to assess UV resistance, color stability, and surface cracking under prolonged outdoor exposure.
Standards Compliance: ISO 16474‑2; ASTM G155; SAE J2527
Temperature and Humidity Test Chamber
Profile: Precise cycles from –70 °C to +150 °C (± 0.5 °C) and 10 %–98 % RH (± 2.5 % RH); SUS 304 stainless steel interior; ± 0.001 °C precision sensors; adjustable sample racks supporting up to 50 kg per layer.
Coating Focus: Tests thermal expansion, adhesion loss, moisture‑induced blistering, and bond‑strength degradation of coatings under extreme climatic swings.
Standards Compliance: IEC 62660‑2; ASTM D2247
Profile:
- IPX1–IPX2: Vertical drip tests for dripping‑water exposure.
- IPX3–IPX4: Oscillating‑spray tubes, reproducing rain or splashing from multiple angles.
-…
Coating Focus: Verifies coating adhesion, water‑penetration resistance, and prevention of delamination or blistering under continuous or oscillating spray.
Standards Compliance: IEC 60529; ISO 20653
From basic corrosion to advanced weathering and water‑resistance tests, LIB's coating test chambers deliver precise, programmable, and standards‑compliant solutions. Built for global requirements and real‑world challenges, LIB ensures your coatings are validated before they face the elements-protecting your investments and reputation for the long haul.
Partner with LIB to advance your coating reliability and exceed the highest benchmarks of performance, durability, and safety!
>> Contact us to get best quote<<