Rain Test Chamber
Ipx3 Water Test Chamber by simulating the external rain environment assessment and determining the impact of electronic and electrical products, external lighting devices, automobile and motorcycle lamp shells and seals on the products in the rainy environment, the box rain test chamber can provide corresponding environmental simulation and acceleration tests for quality control, scientific research, product research and development, etc.
IPX3 and IPX4 experimental principle of rain test chamber
The rain test chamber can be divided into multiple waterproof levels, the waterproof level is IPX1~IPX9, of which IPX34 is a rain test chamber, simulating a dripping rain natural environment, and conducting a short-term IPX34 experimental test on the tested sample.
IPX3 Rain test chamber
60° on each side of the midpoint of the pendulum tube
The arc section is equipped with water spray holes;
The test shell is placed in the middle of the pendulum tube semicircle,
The pendulum pipe swings 60° on each side of the perpendicular line,
Each swing requires about 4S(2×120°),
The duration of the test was 5 min;
The allowable radius of the pendulum tube is 1600mm.
Rain Test Chamber Control System
1. The programmable controller is used to control the angle of the pendulum tube, the swing frequency, the speed of the turntable, the selection of the rotary tube and the pendulum tube, and the time cycle setting, and the control system is equipped with Schneider executive components.
2. The pendulum tube, rotary tube and turntable are independent control systems, and the pendulum tube cannot be started if the pendulum tube is selected, and the pendulum tube cannot be started if the pendulum tube is selected.
3. Time setting controls several independent systems separately.
4. Equipped with water filter, imported executive components.
Safety protection system of chamber rain test chamber
Protection of leakage, short circuit, motor overheating, overload, fuseless protection switch, etc.
