Environment Conditions: Temperature: +5°C ~ +35°C; Relative Humidity: ≤85%; Pressure: 86 KPa—106 KPa
The laboratory temperature is controlled within the range suitable for the test conditions of the cabinet. The most ideal ambient temperature should be controlled between + 5 ° C ~ + 35 ° C, which can make the test more accurate. Good results are generally obtained if the temperature is slightly higher, unless the test requires a low temperature environment. Due to the temperature of the test chamber). The ambient temperature is not lower than 0 degrees in any case.
Space Conditions: Sufficient space for ventilation
It is very important for the normal operation of the system to choose the place where the S-150 salt spray test box is placed. It is required to choose a flat place. It is best to place it near the outer wall and the drain. Electricity and compressed air need to be easily connected to the test The site where the machine is located. There should also be distilled water or deionized water available for sewage disposal, and the most suitable sewage treatment can be arranged. The sewage treatment must comply with local regulations.
Left view installation Front view installation
When the cabinet is delivered, it should be placed in a place with aisles around it. Check each part of the salt spray test box for damage during transportation, and then assemble and use it.
Safety Instruction：Prohibited to test explosive, inflammable and high corrosive substance；Chemical exposure to the equipment is prohibited；Equipment must be safety on the ground to avoid electrostatic induction.
