Latest Products
Contact Us
+8618700875368
No.6 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Blowing Dust Test Equipment
Name:Blowing Dust Test Equipment
Interior Volume:1000L；
Air velocity: 1.5 -8.9m/s；
Concentration of dust:10.7±7g/ m³；
Dust particles : ＜ 150μm；
Air velocity: 18.0 -29.0m/s；
Concentration of sand:0.18+0.2g/m³；
Sand particles：149μm - 600μm, 600μm - 850μm；
Description
LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of blowing dust test equipment in China, featured by quality products and low price. Welcome to buy CE approved blowing dust test equipment in stock here and get quotation from our factory. Contact us for discount information.
Blowing Dust Test Equipment is driven by a high-power fan to blow a certain concentration of sand dust through the surface of test samples at a certain flow rate, so as to evaluate the ability of these test samples (equipment) to prevent the penetration effect of dust particles, the abrasion or blocking effect of gravel, and the ability to store and operate when exposed to dry sand or dusty atmosphere.
Specifications
| Name | Blowing Dust Test Equipment |
Model | DIM-1000 |
Internal Dimension | 1000*1000*1000mm D*W*H |
Overall Dimension | 2800*3500*2000mm D*W*H |
Interior Volume | 1000L |
Blowing Dust | |
Air velocity | 1.5 -8.9m/s |
Concentration of dust | 10.7±7g/ m³ |
Dust particles | ＜ 150μm |
Blowing sand | |
Air velocity | 18.0 -29.0m/s |
Concentration of sand | 0.18+0.2g/m³; 1.1+0.3g/m³; 2.2+0.5g/m³ |
Sand particles | 149μm - 600μm, 600μm - 850μm |
Controller | Programmable color LCD touch screen controller |
Door Lock | Electromagnetic lock |
Testing Platform Diameter | 600mm |
Testing Platform Speed | 1-7 r.p.m |
Dust Detector | Integrated dust detector |
Dust collection and cleaning | Equipped with a vacuum cleaner interface, an electric vibrator is installed on the entire air duct and the wall of the test chamber, which can shake off and disperse the dust absorbed on the wall. |
Exterior Material | A3 Steel Plate with protective coating |
Interior Material | SUS304 stainless steel |
Power Supply | 380V 50Hz |
Maximum Noise | 65 dBA |
Standard | MIL-STD- 810g |
Design Detail
 |  |
| Workroom | Large Centrifugal Fan |
 |  |
Feature
1. The Dust test equipment shall be well sealed.
2. Ground the test piece and the test device to avoid the accumulation of electrostatic charge, and check the resistance or circuit continuity according to the corresponding safety requirements of the test piece
3. Box sealing: Blowing sand test equipment,there is no dust leakage during operation, which can well protect the surrounding environment from pollution
4. Wind speed simulation system: strong wind is generated by high-power centrifugal fan, and the wind speed is automatically adjusted by frequency converter.
5. MIL-STD-810 Dust equipment,The rotating table rotates counterclockwise at 1 rpm, and some slots are provided to fix the test piece
Hot Tags: blowing dust test equipment, manufacturers, suppliers, factory, cost, price, used, specification, for sale, MIL STD 810G 510 Blowing Dust And Sand Test Chamber, MIL STD 810H METHOD 510 Dust And Sand Test Chamber, Sand chamber talcum powder, Dust Circulating Chamber, Dust resistance test chamber, Dust IP Test Machine
You Might Also Like
