The Humidity Environmental Test Chamber is used to test the heat resistance, cold resistance, humidity resistance and dry resistance of products. It is used in temperature and humidity tests of aerospace, rubber, food, textiles, plastics and other products.
Sample Placement
During the use of the constant temperature and humidity test chamber, the requirements of the test products are different, the shapes of the test products will be different, and the placement methods are also different.

liquid or powder

Plastic Rubber

Multiple Samples
●Liquid or Powder
If the test product is liquid or powder, it needs to be packed in a container, and it must be guaranteed not to leak out.
●Plastic Rubber
For rubber and plastic, it is necessary to place a tray under the test sample during the test to avoid the test sample from being melted during the test.
●Multiple Samples
For multiple samples, adjust the position of the sample holder according to the actual situation, and there must be at least a 10cm gap from the position of the chamber wall, so as not to affect the test.
Precautions
1. When the test is in progress, the test sample is placed in the middle of the constant humidity test chamber, otherwise it will hinder the flow of wind inside the chamber.
2. It is not allowed to put flammable and explosive substances and volatile substances into the chamberfor testing, which will have very dangerous consequences.
3. There must be a certain gap between samples, and do not place them together randomly, otherwise it will affect the final test data.




