The Salt Fog Test Instruments mainly uses the salt spray corrosion method to detect the reliability of the corrosion resistance of the tested samples. The salt spray mainly refers to the dispersed system composed of tiny droplets in the atmosphere.
Many products need to simulate the destructiveness caused by the climate around the ocean, so the alternating salt spray corrosion test chamber should be used.
Spray Device
Cover
Saturated Air Barrel
Sample Holder
Composition of LIB Salt Spray Test Chamber
1. Spray Device
The tower-type sprayer has a built-in glass nozzle. The spray is mainly guided by the tower tube and dispersed through the cone. After being evenly dispersed, it permeates the interior of the entire laboratory.
2. Salt Spray Corrosion Test Chamber Cover
The roof-style beveled 110-degree perspective cover can clearly observe some conditions of the indoor test. Isolate the water-tight chamber cover used by the sink to prevent the leakage of salt spray.
3. Saturated Air Barrel
Placed at the bottom of the control chamber, it is made of SUS#304 stainless steel plate, which plays the role of filtering, heating and humidifying, so that the purified air reaches the saturated temperature and humidity and then sprays to the nozzle. The saturator has automatic Hydrating function.
4. Other
The salt spray chamber is made of glass fiber reinforced plastic, which is corrosion-resistant and not easy to deform. V-shaped grooves and round rods for placing samples, heating wires, etc.
