Latest Products
Contact Us
+8618700875368
No.6 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Salt Spraying Chamber
Name:Salt Spraying Chamber
materials:Glass Fiber
Application:Salt Corrosion Test
Humidity Range:30% ~ 98% RH
Temp. Range:+10 ℃ ～ +90 ℃
Spray Type:Continuous / Periodic
Controller:PID controller
Description
LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of salt spraying chamber in China, featured by quality products and low price. Welcome to buy CE approved salt spraying chamber in stock here and get quotation from our factory. Contact us for discount information.
Salt Spraying Chamber the overall molding is welded by high temperature, corrosion resistance, easy to clean, no leakage phenomenon. Tower spray system, and equipped with salt filtration system, no crystalline nozzle, salt spray distribution is uniform, the amount of sedimentation is freely adjusted.
Salt spray corrosion test chamber ,The lid is made of transparent material to clearly see the test items and spray conditions inside the device. The water seal structure between the lid and the body is adopted, and there is no salt spray overflow.
Video
Parameter
| Name | Salt Spraying Chamber | ||
Model | S-150 | S-250 | S-750 |
Internal dimensions (mm) | 470*590*400 | 640*1000*500 | 750*1100*500 |
Overall dimensions (mm) | 620*1400*1050 | 810*1800*1180 | 920*1900*1200 |
Temp. Range | Ambient ～ +60 degree | ||
Temp. Fluctuation | ± 0.5℃ | ||
Temp. Deviation | ± 2.0 ℃ | ||
Humidity Range | 95% ~ 98% RH | ||
Salt Fog Deposition | 1～2ml / 80cm2 · h | ||
Spray Type | Continuous / Periodic | ||
Heating Element | Nichrome heater | ||
Salt Fog Collected | Fog collector and fog measure cylinder | ||
Controller | PID controller | ||
Material | Glass fiber reinforced plastics | ||
Standard Configuration | 8 round bars and 7 V-shaped grooves | ||
Power | 380V 50Hz | ||
Environmental Conditional | 5℃～+35 ℃ ≤85% RH | ||
Details Design
 |  |  |
| Spray Tower | Specimen Holder | Controller |
 |  |
Characteristics
Internal Structure
1. Spray device: tower sprayer, hidden glass nozzle, spray by the tower tube guidance and then through the cone type dispersion, uniform dispersion after diffusion to the entire laboratory interior.
2. Adjustment of spray volume: salt spray test chamber,Increase the spray volume of the conical disperser on the spray tower, and reduce the spray volume.
3. Collector: The fine mist emitted by the nozzle settles in free fall, and one or more funnel cups with a surface area of 80cm2 are built in to collect the salt mist, which condenses into water and flows from the catheter to the metering cylinder on the outside of the box.
4. Heating sink: salt spray chamber,The sink is attached to the bottom of the laboratory and is used to fill the water and heat it to keep the temperature of the laboratory stable.
5. Shelf: made of plastic steel, a single load-bearing no more than 2kg, such as scattered placement can bear the weight of less than 10kg, the shelf has round holes on both sides, is to place the stick to the vertical surface of 15 degrees, 30 degrees angle.
Hot Tags: salt spraying chamber, manufacturers, suppliers, factory, cost, price, used, specification, for sale, B117 Salt Spray Corrosion Test Chamber, cct chambers, Electric Salt Spray Testing Machine, Salt spray tester, salt spray testing machine, Solar PV Salt Spray Testing Device
You Might Also Like
