Cell Stabilized Temperature Test Chamber

LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of cell stabilized temperature test chamber in China, featured by quality products and low price. Welcome to buy CE approved cell stabilized temperature test chamber in stock here and get quotation from our factory. Contact us for discount information.

Cell stabilized temperature test chamber,environmental chambers for Battery Testing are designed and manufactured to meet various types of battery testing requirements of its customers by keeping all safety options in mind against any harmful explosions or ignitions and user safety while testing these batteries for environmental stress conditions

Product Parameters

Test Procedure

Temperature cycling test machine,The Cell or battery to be tested shall be heated for a period of time necessary to reach a homogeneous stabilized temperature of 57 ± 4 ℃, measured on the external case, this period of time depends on the size and design of cell or battery and should be assessed and documented, if this assessment is not feasible.

the exposure time shall be at least 6 hours for small cells and small batteries, and 12 hours for large cells and large batteries, then the cell or battery at 57 ± 4 ℃ shall be subjected to one short circuit condition with a total external resistance of less than 0.1ohm.

This Short circuit condition is continued for at least one hour after the cell or battery external  case temperature has returned to 57 ± 4 ℃, or in the case of large batteries, has decreased by half of the max. temperature increase observed during the test and remains below that value.

Battery Industry Standards

Cell temperature test equipment series mainly for testing the battery module of Electric bike, Electric Motorcycles, etc. These series meet the standard compliance of IEC62619, UL2580 and GB31485-2015. Including short circuit, thermal test, drop test and crush test, etc.

1. IEC 62660-2

2. ISO 12405-4: Electrically propelled road vehicles – Test specification for lithium-ion traction battery packs and systems Part 4: Performance testing

Battery Test chamber

Temperature cycling test chamber is suitable for testing various performance indexes of aerospace products, electronic instruments, materials, electronic products and various electronic components under the condition of rapid temperature change.

Hot Tags: cell stabilized temperature test chamber, manufacturers, suppliers, factory, cost, price, used, specification, for sale, Programable Humidity Refrigerate Climatic Chamber, High Temperature Hot Air Heat Chamber, High Temperature High Humidi ty Test Chamber, temperature humidity test chamber, High Temperature High Humidity Test Chamber, hot air oven