Latest Products
Contact Us
+8618700875368
No.6 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Adjustable Temperature Cooling Refrigerating Chamber
Temperature Range: -70℃～+150℃;
Temperature Fluctuation: ± 0.5 ℃;
Temperature Deviation: ± 2.0 ℃;
Material: SUS304 stainless steel;
Heating Element: nichrome heater;
Safety Protection Device;
Standard & customized;
Volume: 100L-1000L;
Name: Adjustable Temperature Cooling Refrigerating Chamber
Description
LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of adjustable temperature cooling refrigerating chamber in China, featured by quality products and low price. Welcome to buy CE approved adjustable temperature cooling refrigerating chamber in stock here and get quotation from our factory. Contact us for discount information.
Adjustable Temperature Cooling Refrigerating Chamber can simulate -86 degrees Celsius to low temperature，and 150 degrees Celsius to high temperature. The French Taikang compressor refrigeration system can be used to quickly raise and lower the temperature. The programmable color touch screen controller can be set with fixed programs or segmented programs to freely adjust and control temperature fluctuations.
Adjustable Temperature Cooling Refrigerating Chamberis widely used in Automobile, Material, Electronics, Aerospac, PV panels, Navigation, Commodity, Paintings, Battery, Pharmaceutical, Military and Cable industry.
Product Parameters
| Name | Adjustable Temperature Cooling Refrigerating Chamber | ||||
Model | T-100 | T-225 | T-500 | T-800 | T-1000 |
Internal Dimension (mm) | 400*500*500 | 500*600*750 | 700*800*900 | 800*1000*1000 | 1000*1000*1000 |
Overall Dimension (mm) | 860*1050*1620 | 960*1150*1860 | 1180*1350*2010 | 1280*1550*2110 | 1500*1550*2110 |
Interior Volume | 100L | 225L | 500L | 800L | 1000L |
Heat load | 1000W | ||||
Temperature Range | A : -20℃ ～ +150 ℃; B : -40℃ ～ +150 ℃; C: -70℃ ～ +150 ℃ | ||||
Temperature Fluctuation | ± 0.5 ℃ | ||||
Temperature Deviation | ± 2.0 ℃ | ||||
Cooling Rate | 1 ℃ / min | ||||
Heating Rate | 3 ℃ / min | ||||
Cooling system | Mechanical compression refrigeration system | ||||
Refrigerating unit | French TECUMSEH compressor | ||||
Refrigerant | R404A, R23 | ||||
Heating Element | Nichrome heater | ||||
Temperature Sensor | PTR Platinum Resistance PT100Ω/MV A-class, accuracy 0.001℃ | ||||
Exterior Material | Steel Plate with protective coating | ||||
Interior Material | |||||
Thermal Insulation | Polyurethane foam and insulation cotton | ||||
Observation Window | Interior lighting, double-layer thermo stability silicone rubber sealing | ||||
| Standard Configuration | 1 Cable hole (Φ 50,) with plug; 2 shelves | ||||
Power Supply | 220V 50Hz / 380V 50Hz | ||||
Maximum Noise | 65 dBA | ||||
Environmental Conditional | 5℃～+35 ℃ ≤85% RH | ||||
Product Fetures
◇ Refrigerating unit: french TECUMSEH compressor;
◇ Refrigerant: R404A, R23;
◇ Heating Element: nichrome heater;
◇ Water supply system: automatic water supply, water purification system;
◇ Humidifier: external isolation, stainless steel surface evaporation humidifier;
◇ Dehumidification: evaporator;
◇ Temperature Sensor: PTR Platinum Resistance PT100Ω/MV A-class, accuracy 0.001℃
Product Structures
Temperature Sensor |
Cooing System |
Controller |
Cable Hole |
Temperature Sensor: PT-100 Class A sensor, real-time accurate detection and display of temperature changes at 0.001 degrees.
Cooling System: the refrigerant completes a refrigeration cycle through four basic processes of evaporation, compression, condensation, and throttling in the system.
Controller: The PID controller as the main control unit to command, operate, detect and redistribute the various components of the equipment to achieve maximum effective use.
Cable Hole: A standard test hole, located at the left side of the work room, is provided with a sleeve inside to prevent moisture from entering the insulation layer. Equipped with flange. The standard inner hole diameter is 50mm. Soft silicone plug seal; Metal enclosure closed, beautiful designed.
· Insulation
10cm thick polyurethane foam and insulation cotton;Better insulation performance, degradation resistance, environmental protection, noise reduction.
· Workroom
The internal material is 304 stainless steel, mirror surface, rust-proof to high and low temperature and moisture corrosion; Nice ruggedness and long life.
· Air Circulation
The high-quality centrifugal fan is used to strongly supply air circulation, making the temperature distribution in the test area uniform.
√ 36 month warranty and life-long service for free
√ Quick delivery and free shipping
√ CE ROHS certification
√ Local agent and reliable manufacturer
Leave your message and get a free quote.
Hot Tags: adjustable temperature cooling refrigerating chamber, manufacturers, suppliers, factory, cost, price, used, specification, for sale, PV Panel Temperature Change Test Chamber, humidity controlled oven, Condensation Humidity test equipment, Air Controlled Temperature Climatic Ageing Chamber, Humidity Control Environmental Chamber, high temperature thermal chamber
You Might Also Like
