PV Panel Humidity Freeze Test Device

LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of pv panel humidity freeze test device in China, featured by quality products and low price. Welcome to buy CE approved pv panel humidity freeze test device in stock here and get quotation from our factory. Contact us for discount information.

 

PV Panel Humidity Freeze Test Device,The chamber's damp heat test is performed according to IEC 61215 and IEC 61646 standards. With this test, the PV module's ability to withstand the effect of long-term penetration of humidity can be accurately determined. PV modules are subjected to temperatures upwards of 85°C and relative humidity of 85% for 1,000h in the climatic chamber. 

 

Technical Specification

---

 

Name	PV Panel Humidity Freeze Test Device
Model	PV-04
Internal Dimension	1300*700*1350
Overall Dimension	1900*1100*1750
Interior Volume	1220L
Temperature Range	-60℃～+100 ℃
Temperature Fluctuation	± 0.5 ℃
Temperature Deviation	± 2.0 ℃
Humidity Range	20% ~ 98% RH
Humidity Deviation	± 2.5% RH
Temperature Change Rate	1~3.4 ℃ / min
Panel Size	1m*2m
View Window Size	330*370(mm)
Panel Capacity	4 / 6 / 8 / 10 / 12 Pieces
Build-in Water Tank	270*300*450(mm)

 

Environmental Test Chambers for Solar Panels

 

Test Device

---

Thermal Cycling Test Chamber for Solar Panels

A)  A PV climate chamber with automatic control of temperature and humidity, can hold one or more components, as shown in figure 12.

 

B)  A device of supporting components is installed in the climate chamber, and to ensure that the air around can freely cycle, heat transfer installation or device should be small, in fact, components should be insulated.

 

C) A instrument to measure and record the component temperature with accuracy of ±1 ℃. If multiple components test at the same time, only need to monitor one representative component temperature.

D) In the whole test process, instrument to monitor each component internal continuity.

 

Test Procedure

---

Damp Heat Test Chamber for Solar Panels

After the test, the PV modules are analyzed, and those with a damaged PV cell reveal which will experience significantly decreased power in certain environmental conditions. Through the damp heat test, the chamber can prove the reduction of durability resistance of PV modules to the long-term effect of humidity

 

Details of the PV Panel Humidity Freeze Test Device

---

 

	-304 Stainless steel interior   -Supporting racks for fix PV panels can be adjusted up and down to fit the various sizes of panels   -Test hole, located at the left side of the workroom   -Panel Capacity 4 / 6 / 8 / 10 / 12 Pieces   -Double layer antifog viewing window   -Standard and customized models
-Double layer antifog viewing window   -Standard and customized models
	-Touch-screen PID controller   -Simple and efficient operating system   -Standard language: English/Chinese, other languages can be customized
-Cable hole for testing panels   -Two standard diameters are available: 50 mm/ 125 mm   -Located on the left side of the PV test chamber

 

Panoramic View of the PV Panel Humidity Freeze Test Device

---

 

LIB Environmental is one of the professional and credible manufacturers of climatic and environmental testing chambers in China. Equipped with a professional factory, we can offer you portable temperature humidity chamber with competitive price. Now we have high quality portable temperature humidity chamber for sale, welcome to buy our test chamber at low cost and check the price with our supplier.

Hot Tags: pv panel humidity freeze test device, manufacturers, suppliers, factory, cost, price, used, specification, for sale, Climate condensation chamber, condensed water test chamber, Constant Flow Humidity Control Oven Chamber, PV Panel Temperature Change Test Chamber, Reach In Environmental Conditions Control Chamber, temperature humidity environmental chamber