Modern products are expected to perform reliably in extreme heat, freezing cold, high humidity, corrosive environments, and long-term
outdoor exposure. Before entering the market, manufacturers must verify that their products can withstand these environmental stresses without failure.
LIBLarge Environmental Chamber provides a controlled testing environment where engineers can accurately simulate temperature, humidity, corrosion, and other climatic conditions according to international standards, helping industries validate product performance, safety, and service life.
Working Principle of a Large Environmental Chamber
Temperature and Humidity Simulation
The core function of a Large Environmental Chamber is to create stable and repeatable temperature and humidity conditions. Through a
mechanical compression refrigeration system, electric heaters, humidifiers, and advanced PID control technology, the chamber can accurately simulate environmental conditions ranging from -70°C to +150°C and 20% to 98% RH. PT-100 Class A sensors continuously monitor chamber conditions and provide real-time feedback to the controller, allowing automatic adjustment of heating, cooling, and humidification outputs. As a result, temperature stability can be maintained within ±0.5°C, while humidity accuracy reaches ±2.5% RH.
This capability is essential for industries such as automotive, aerospace, electronics, defense, and renewable energy. Testing is commonly conducted according to internationally recognized standards including IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-78, MIL-STD-810, and RTCA DO-160. Large Environmental Chambers are particularly suitable for evaluating oversized products such as battery packs, electrical control cabinets, photovoltaic modules, and complete equipment assemblies under controlled climatic conditions.
Airflow Circulation and Uniformity Control
Maintaining consistent environmental conditions throughout a large test space requires precise airflow management. LIB Large Environmental Chambers are equipped with multiple circulation fans and optimized air duct systems that distribute conditioned air evenly throughout the workroom. Even in chambers with volumes reaching 98 m³, temperature and humidity uniformity remain tightly controlled, ensuring reliable and repeatable testing results.
Effective airflow circulation eliminates hot spots, cold zones, and localized humidity variations that could affect product performance evaluations. This is especially important for large-scale testing in aerospace manufacturing, automotive engineering, military equipment development, and industrial machinery production. Uniformity performance is designed to support testing requirements specified in standards such as IEC 60068, ISO 16750, SAE J1455, and MIL-STD-810. By ensuring that every area of the chamber experiences the same environmental conditions, manufacturers can obtain more accurate data when validating the durability and reliability of large products.
Automated Monitoring and Safety Protection
Environmental testing programs often operate continuously for days, weeks, or even months, making intelligent automation and comprehensive safety protection essential for reliable operation. LIB Large Environmental Chambers are equipped with a programmable color touchscreen controller capable of storing up to 120 test programs and executing complex multi-step environmental profiles automatically. Operators can monitor chamber performance remotely through Ethernet connectivity, export test data via USB, and receive real-time alarm notifications whenever abnormal conditions occur, ensuring full visibility throughout the testing process.
To protect both test samples and equipment, the chamber incorporates multiple safety systems, including over-temperature protection, over-current protection, refrigerant high-pressure protection, water shortage protection, earth leakage protection, and humidifier dry-heating protection. These features help maintain stable operation during long-duration testing while minimizing the risk of unexpected downtime.
The automated monitoring system is widely used in aerospace qualification laboratories, automotive validation centers, electronics reliability testing facilities, and other industries requiring continuous environmental simulation. The safety architecture is designed in accordance with internationally recognized requirements commonly associated with CE certification, IEC electrical safety standards, CSA safety regulations, and ISO quality management systems. By reducing manual intervention and providing continuous performance monitoring, the chamber improves testing efficiency, enhances data reliability, and supports consistent long-term environmental testing results.
Vietnam Customer Highly Satisfied with the 98 m³ Large Environmental Chamber
A customer in Vietnam recently selected a 98 m³ LIB Large Environmental Chamber to conduct product performance and reliability
testing on large industrial equipment.
After installation and operation, the customer expressed high satisfaction with several key advantages.
Easy Loading and Unloading
One of the most appreciated features was the spacious walk-in design. Large products can be moved directly into the chamber without disassembly, significantly simplifying test preparation and reducing handling time. This design not only improves testing efficiency but also minimizes labor requirements and lowers the risk of accidental damage during sample transportation. For oversized equipment and heavy industrial components, the walk-in configuration provides a much more practical testing solution than conventional environmental chambers.
High Temperature and Humidity Accuracy
The customer was particularly impressed by the chamber's environmental control performance. With a temperature range from -60°C to
+150°C and a humidity range from 20% to 95% RH, the chamber can accurately reproduce a wide variety of climatic conditions. Advanced PID control technology and PT-100 Class A sensors maintain temperature stability within ±0.5°C and humidity accuracy within ±2.5% RH. Even during extended testing periods, the chamber delivers highly stable and repeatable conditions, ensuring reliable data for product validation and quality assessment.
Safe and Reliable Operation
Reliability and safety are critical for continuous environmental testing, especially when tests run for several days or weeks. The customer valued the chamber's comprehensive protection systems, which continuously monitor operating conditions and automatically respond to abnormal situations. Integrated safeguards such as over-temperature protection, water shortage protection, refrigerant pressure protection, leakage protection, and automatic fault alarms help ensure safe operation while protecting both the equipment and
test samples. The system is designed according to CE requirements and follows IEC and CSA safety principles, providing additional confidence for long-term operation.
Excellent Cost Performance
Compared with investing in multiple small environmental chambers, the 98 m³ Large Environmental Chamber offers a more efficient and economical solution. Its large workspace allows multiple products or large assemblies to be tested simultaneously under identical environmental conditions. This reduces operating costs, improves laboratory space utilization, increases testing throughput, and shortens overall validation cycles. For manufacturers conducting large-scale reliability testing, the chamber provides an excellent balance between performance, capacity, and long-term return on investment.
LIB Temperature & Humidity Large Environmental Chamber vs Salt Large Environmental Chamber
Different environmental tests require different chamber configurations.
|
|
|
|
|---|---|---|
| Main Purpose | Climate simulation | Corrosion testing |
| Temperature Range | -70°C to +150°C | +10°C to +90°C |
| Humidity Range | 20% to 98% RH | 30% to 98% RH |
| Test Conditions | Heat, cold, humidity cycling | Salt fog exposure |
| Interior Material | SUS304 Stainless Steel | 316 Stainless Steel |
| Standards | IEC 60068, MIL-STD-810, RTCA DO-160 | ASTM B117, ISO 9227, ASTM G85, IEC 60068-2-11 |
| Typical Samples | Batteries, electronics, aerospace components | Metal parts, coatings, marine equipment |
| Test Objective | Reliability and durability | Corrosion resistance |
| Optional Functions | Vibration, low pressure, thermal cycling | NSS, AASS, CASS testing |
How to Choose?
|
Choose a Temperature & Humidity Large Environmental Chamber when you need to evaluate: Product lifespan Thermal stress Humidity resistance Climate adaptability Reliability validation |
Choose a Salt Large Environmental Chamber when your focus is: Corrosion resistance Protective coating evaluation Marine environment simulation Automotive corrosion testing Material durability under salt exposure Some industries, such as automotive and aerospace, often require both chambers to complete a full environmental qualification program. |
LIB popular Environmental Chamber
Drive In Large Environmental Chamber
Test Large Products with Ease, Walk-In Space for Maximum Capacity
Reach-In Environmental Chamber
Reliable Temperature & Humidity Testing, Versatile Solution for Daily Laboratory Use
Benchtop Environmental Chamber
Compact Size with Big Performance, Precise Testing Right on Your Workbench
Meet the Highest Water Protection Standards, Simulate Extreme High-Pressure Wash Conditions
Accelerate Weathering and Sunlight Exposure Testing, Reproduce Real-World Climate Conditions
Salt Large Environmental Chamber
Evaluate Corrosion Resistance with Confidence, Comply with ASTM and ISO Salt Fog Standards
FAQs on the Large Environmental Chamber
Q1: Can LIB customize chamber size?
Yes. LIB provides fully customized chamber dimensions, internal layouts, cable ports, observation windows, and optional testing functions based on customer requirements.
Q2: What standards can the chamber comply with?
The chamber can support testing according to: IEC 60068 Series, MIL-STD-810, ISO 16750, SAE J1455 and other customer-specific standards.
Q3: How is the chamber transported internationally?
Large Environmental Chambers are shipped in modular sections for easier transportation. Engineers provide installation guidance and assembly support upon arrival.
Q4: Does LIB provide installation and training services?
Yes. LIB provides: On-site installation, Commissioning, Operator training, Preventive maintenance guidance, Remote technical support to ensure successful operation.
Q5: What is the delivery time for a customized chamber?
Delivery time depends on chamber size and configuration. Standard customization projects typically require 8–12 weeks, while highly specialized projects may require additional engineering time.
Whether you need temperature and humidity testing, corrosion testing, or a fully customized large-scale environmental simulation solution, LIB Industry provides reliable, standards-compliant chambers designed for demanding industrial applications.
Contact LIB Industry today to discuss your testing requirements and discover the ideal Large Environmental Chamber for your laboratory or production facility.
