Latest Products
Contact Us
+8618700875368
No.6 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Salt Fog Test Equipment
LIB salt fog and SO2 corrosion chamber exposes the sample to a series of different environment conditions that combining salt spray with temperature, humidity, SO2 gas, drying, wetting and more. Suitable for testing to standards including; ASTM B117, ISO 9002, IEC60068 and ASTM G85.
ASTM G85 Annex 4 (A4) is a corrosion test which introduces SO2 gas directly into the salt spray chamber according to specified cycles. SSC chambers are upgraded to programmable controller and Ethernet access. All models are automated, and can work continuously. Various models can meet different test
Description
LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of salt fog test equipment in China, featured by quality products and low price. Welcome to buy CE approved salt fog test equipment in stock here and get quotation from our factory. Contact us for discount information.
This Salt Fog Test Equipment simulates the corrosion test in man-made environment, suitable for determining the adaptability of electrical and electronic products and their use of materials in chemically corrosive environmental conditions of use and inspection of metal materials with or without corrosion protection comparative quality; suitable for rapid analysis of organic and inorganic coatings in discontinuities, holes and damage and other phenomena of corrosion prevention test, in addition, for quality control purposes, can be compared between specimens coated with the same paint; salt spray test is particularly suitable for detecting discontinuities in certain metal, organic, anodic oxidation and conversion coatings, such as small holes and other defects.
Main application field
Metal Spraying
Chemical Technology and Metallurgy
Transportation
Aerospace
Products Description
Spraying system
◆ Spraying principle: the siphon principle is used to absorb the brine and then atomize it, the degree of atomization is uniform and there is absolutely no blockage of crystallization, which can ensure continuous testing: air compressor → primary oil and water separator → storage tank → pressure reducing valve → total solenoid valve → secondary oil and water separator → saturator → regulator → spray solenoid valve → nozzle;
◆ Spraying device: A brine spraying device (spraying tower) is installed in the center of the studio to ensure a very uniform distribution of laboratory spray. A spray water supply tank is installed at the bottom of the spray tower, and a corrosion-resistant automatic water level float is installed inside the tank, which can automatically control the water level height in the tank.
◆ Spray collector: 2 conical funnels monitor the size of the spray volume in real time (one is closest to the spray tower and the other is farthest from the tower), and a silicone hose is installed at the bottom of the funnel to connect to the outdoor measuring cylinder, which can view the size of the spray volume in real time and ensure the test accuracy of the test sample.
◆ Nozzle: The unique quartz glass fired nozzle with a rounded inner cavity and precise angle allows for long term spraying without crystallization, which can control the size and angle of the spray volume.
◆ Spraying and defogging: manual spraying or automatic spraying according to the program settings; defogging can also be done manually or automatically according to the program settings (using compressed air to fill the chamber and then discharge the chamber fog to quickly defog)
The inlet pipe for sulfur dioxide gas is located on the rear side of the box and is made of copper, one-half inch; the discharge pipe is a silicone hose, also one-half inch in size.
The salt fog test equipment is equipped with sulfur dioxide gas treatment device, through the chemical reaction of sodium hydroxide solution and sulfur dioxide, the sulfur dioxide that will be discharged to the outdoors for harmless treatment.
The salt fog test equipment has no insulating layer cause the shell is hollow design.
The test equipment has the option to customize the ultrasonic spray to achieve a finer spray than the standard configuration.
You may want to know
|
Model |
SSC-010 |
SSC-016 |
SSC-020 |
|
Internal dimensions (mm) |
800*1450*680 |
1000*1600*800 |
1000*2000*900 |
|
Overall dimensions (mm) |
2600×1400×1650 |
2750*1600*1800 |
3150*1600*2100 |
|
Interior Volume (L) |
780 |
1280 |
1800 |
|
Temperature Range |
+10 ℃ ～ +90 ℃ |
||
|
Temperature Fluctuation |
± 0.5 ℃ |
||
|
Temperature Deviation |
± 2.0 ℃ |
||
|
Humidity Range |
30% ~ 98% RH |
||
|
Humidity Deviation |
+ 2%, - 3% |
||
|
Salt Fog Deposition |
1～2ml / 80cm2 · h |
||
|
SO2 Gas Control |
Control and display volume of SO2 gas |
||
We will provide you with the best price, the best service, the most professional equipment. If you are interested in this salt fog test equipment , you can contact our customer service, or leave your contact information, we will reply to you in the first time.
Hot Tags: Salt Fog Test Equipment, manufacturers, suppliers, factory, cost, price, used, specification, for sale, salt spray tester machine, Solar PV Salt Spray Testing Device, Salt spray tester, Salt Spray Test Device, cyclic corrosion testing standards, salt spray fog corrosion testing
You Might Also Like
