Solar Panel Test Chamber

LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of solar panel test chamber in China, featured by quality products and low price. Welcome to buy CE approved solar panel test chamber in stock here and get quotation from our factory. Contact us for discount information.

Description

Solar Panel Test Chamber designs and manufactures solar panel testing chambers for testing various size photovoltaic modules and solar panels. These chambers are designed to meet common solar panel test specifications for IEC, UL and ASTM for temperature cycling test, damp heat test and humidity freeze tests.

Solar panel climate chamber aid in qualifying that modules can withstand the thermal stress caused by repeated changes in high and low temperatures along with exposure to high humidity. Unique air flow design and distribution ensures precise air flow required for solar panel testing.

Basic Parameter

Configuration

Test Area ●The internal material is 304 stainless steel, mirror surface, rust-proof to high and low temperature and moisture corrosion; ●This Room is designed for panels up to 1.2m.	Viewing Window ●Double layer insulating glass 8cm thick, made of tempered glass. ●The conductive film is located on the interior glass to prevent window frosting, built-in LED light for the work room lighting; can clearly observe samples.
Cable Hole ● A standard test hole, located at the left side of the work room, is provided with a sleeve inside to prevent moisture from entering the insulation layer. Equipped with flange. ● The standard inner hole diameter is 50mm. ● Soft silicone plug seal; Metal enclosure closed, beautiful designed.	Castors Solar panel thermal test chamber bottom install 4 castors for ease moving, and with brakes function

Characteristics

1. Solar panel environmental chamber meet IEC 61215, IEC61646,UL-1703 and similar test methods

2. Thermal cycle test – 50 and 200 cycles from -40℃ to +85℃

3. Humidity freeze test – 10 cycles from +85℃ & 85%RH to -40℃

4. Damp heat test – 1000h at 85℃ & 85%RH

5. Different models to suit various size of PV Solar Panels

6. Supporting racks for fix PV panels

7. Adjusting heat & cooling change rate

8. Reliable performance

9. Temperature control and display unit

10. Humidity control and display unit

11. Programmable color LCD touch screen controller

Solar Testing Specifications

◆IEC 60068-2-78:Environmental testing -Part 2-78: Tests - Test Cab: Damp heat, steady state

◆IEC 61215:Crystalline silicon terrestrial photovoltaic (PV) modules,Design qualification and type approval

◆IEC 61646:Thin-film terrestrial photovoltaic (PV) modules,Design qualification and type approval

◆IEC 61730:Photovoltaic module safety qualification

Part 1: Requirements for construction and

Part 2: Requirements for testing

◆IEC 62108:Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

◆UL 1703:Flat-Plate Photovoltaic Modules and Panels

◆ASTM E1171:Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

Contact us for quotations

Hot Tags: solar panel test chamber, manufacturers, suppliers, factory, cost, price, used, specification, for sale, high temperature lab oven, temperature humidity controlled oven, Constant Flow Humidity Control Oven Chamber, Temperature And Humidity Cycle Chamber, simulation Environmental chamber, Temperature Humidity Vibration Combined Test Chamber