Latest Products
Contact Us
+8618700875368
No.6 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Thermal Cycle Test Chamber
Model:TS-340;
Volume of test room : 72L;
Upper limit preheat temperature: +220℃;
Lower limit pre-cool temperature:-75℃;
Recovery time: Within 15 minutes;
Controller: Programmable color LCD touch screen controller;
Power Supply: 380V 50HZ;
Name:Thermal Cycle Test Chamber ;
Description
Xi'an LIB Environmental Simulation Industry is one of the most reliable manufacturers and suppliers of thermal cycle test chamber in China, featured by quality products and low price. Welcome to buy CE approved thermal cycle test chamber in stock here and get quotation from our factory. Contact us for discount information.
Description
Environmental conditions have a considerable effect on the function and the reliability of electronic components, devices and systems. The main purpose of thermal cycle test chamber is to determine, if sudden temperature changes have an influence on the specimen’s long term function. In addition, early failures due to part and workmanship defects can be provoked without reaching the mechanical and thermal stress limits of the construction.
Product Parameters
Name | Thermal Cycle Test Chamber | |||
Model | TS-162 | TS-340 | TS-500 | TS-1000 |
Inner dimensions of test room | 300*300*250mm | 450*450*360mm | 650*650*500mm | 850*850*700mm |
Volume of test room | 22L | 72L | 211L | 505L |
Load of test room | 20kg | 30kg | 50kg | 60kg |
Upper limit preheat temperature | +220℃ | |||
Heating time | Ambient temperature to ~ + 200℃, within in 30 minutes. | |||
Lower limit pre-cool temperature | -75℃ | |||
Cooling time | Ambient temperature to ~ -70℃, within in 30 minutes | |||
High temperature exposure range | Ambient temperature +20 to +200°C | |||
Low temperature exposure range | –65 to -5°C | |||
Recovery time | Within 15 minutes | |||
Temperature fluctuation | ≤±0.5℃ | |||
Temperature deviation | ≤±3 ℃ | |||
Controller | Programmable color LCD touch screen controller | |||
Cooling system | Mechanical compression refrigeration system | |||
Exterior material | Steel Plate with protective coating | |||
Observation window | Interior lighting , double-layer thermo stability silicone rubber sealing | |||
Power Supply | 380V 50HZ | |||
Temperature Range
Hot Chamber:Ambient ~ + 200℃, within 30 minutes
Cold Chamber: Ambient ~ -70℃, within 30 minutes
Application
Temperature cycle test chamber is designed for the safe, efficient, and accurate environmental testing of electronics and consumer products, and aerospace, telecommunications, and military and defense components. Non-hazardous
Product Stuctures
Test Area
The specimen automatic transferred from cold chamber to hot chamber by basket. to make the specimen is exposed to the two chambers.
Control Screen
controller with instant recording function to indicate temperature variation curve of thermal shock testing.
Cable Hole
The standard inner hole diameter is 50mm.The sample can be connected to the power supply.
Door Insulation
Double-gasket doors provide additional insulation,Good insulation effect.
Features
1.Horizontal air circulation
2.rapid-responding, nichrome wire heating elements
3.Two zone types with hot/cold compartment setups
4.Vapor-tight, interior liners made of 100% continuously welded stainless steel
5.Fully automatic, PID chamber control through alpha-numeric display
6.The sealing rubber insulators
7.Fiberglass and polyurethane insulation ensures minimal thermal transfer
8.Dual-carriage transport system with stainless steel, wire mesh basket
9.Adjustable recirculation air louvers for optimum performance
Send the enquiry now,Get free parts
Hot Tags: thermal cycle test chamber, manufacturers, suppliers, factory, cost, price, used, specification, for sale
You Might Also Like
